Overview
Stock up on trimmer line with this aftermarket spool designed to feed smoothly through bump-head trimmers. The line diameter and profile are matched to common trimmer-head specifications, delivering clean grass cuts without excessive breakage. A practical supply for homeowners who trim regularly.
Key specifications
- Type: replacement trimmer line
- Material: co-polymer nylon
Compatibility
Compatible with Weed Wacker String 14 ft and related models. Always verify the OEM part number in your owner’s manual against the compatibility list to ensure this replacement will work on your specific machine.
Installation notes
Open the trimmer head by pressing the tabs or unscrewing the cap. Remove any remaining old line from the spool. Cut the new line to the length specified in your trimmer’s manual and wind it evenly onto the spool in the direction indicated by the arrow. Thread the ends through the eyelets, snap the head back together, and tap to advance.
Common questions
Q: Will this .095 line work in my Stihl FS56RCE and FS91R, or is it too thick for those trimmer heads?
Yes, this .095 trimmer line is compatible with Stihl FS56RCE and FS91R setups that are designed to accept .095 diameter line. Each piece is 14 ft long, so it’s a good match if your head uses pre-cut lengths or can be loaded with that amount per refill.
Q: Can I use these 14 ft replacement lines on a Stihl FS38 or FS40CE, or are those models better with a smaller diameter line?
The FS38 and FS40CE are often set up for lighter-duty trimming, so the main thing to check is whether your specific head is rated for .095 line. If your trimmer head only accepts a smaller diameter, this line may feed poorly or put extra strain on the unit, so confirm the head specification before installing.
Q: What’s the best way to install these replacement lines so they last longer and don’t jam in the head?
Clean out any old debris from the trimmer head before loading the new 14 ft line, and make sure each piece is seated evenly according to the head’s loading path. Avoid forcing twisted or brittle line into the spool, and if the line has been stored in a very dry area, soaking it briefly in water can help improve flexibility and reduce breakage.
