Overview
When a component wears out, this aftermarket replacement provides an economical and reliable fix. Built to OEM specifications, it drops into your equipment without modifications, getting you back to work quickly.
Key specifications
- Type: aftermarket replacement part
- Material: matches OEM specifications
- Fitment: direct replacement
Compatibility
Designed to fit Stihl MS210 MS230 MS250 021 023 025 Chainsaw and other models with the same part specifications. Always verify your equipment’s model number against the full compatibility list before ordering.
Installation notes
Remove power from the tool. Follow the disassembly steps in your service manual to access and remove the worn part. Install the replacement, making sure it seats correctly, and reassemble in reverse order. Run the tool briefly to confirm proper operation.
Common questions
Q: Will this 3mm starter rope fit the recoil starter on a Stihl MS250 or 025 chainsaw, or is it too thick?
Yes, this 3mm pull cord is the correct size commonly used on Stihl MS250 and 025 saws, and it also fits MS210, MS230, 021, and 023 models that use OEM references 0000 930 2211 and 1120 195 8200. As long as your starter assembly is original-style and the rope path and handle are in good shape, it should feed and wind properly.
Q: Can I use this 100m bulk roll on a Stihl blower or trimmer that takes the same OEM starter rope numbers?
Yes, if your Stihl trimmer or blower uses the same compatible OEM pull cord numbers, this bulk roll is suitable because the key spec is the 3mm rope diameter. It’s a practical option if you service multiple machines, since you can cut each piece to the needed length instead of buying pre-cut cords.
Q: What’s the best way to install this starter rope so it doesn’t fray or slip out of the pulley on my MS230?
Cut the rope cleanly and lightly melt the ends to prevent fraying before threading it through the pulley and starter handle. Use a firm stopper knot that matches the original setup, then preload the recoil spring carefully so the cord retracts fully without being wound so tight that it overstresses the spring.
