Overview
When your saw’s bar is grooved out or the chain is stretched beyond adjustment, this 10” combo kit gets you back in action fast. You receive a matched guide bar and cutting chain engineered to OEM dimensions, delivering reliable performance at a fraction of the dealer price. A solid pick for weekend wood-cutting duties.
Key specifications
- Bar length: 10”
- Includes: guide bar and chain (matched set)
- Material: hardened alloy bar with chrome-plated chain
Compatibility
Designed for SunJoe and other saws with identical bar-mount dimensions. Before purchasing, verify your specific model number in the compatibility listing, as some saws within a product line use different bar studs or tensioner positions.
Installation notes
Start by loosening the side-cover nuts and removing the worn bar and chain. Clean the bar pad and oil hole thoroughly. Mount the new bar, drape the chain over the nose sprocket and drive sprocket, and reinstall the cover. Set the tensioner so the chain has slight sag on the underside but stays in the rail, then fully tighten the cover.
Common questions
Q: Will this 10-inch guide bar and chain combo fit my Sun Joe SWJ700E pole saw?
This combo is intended for Sun Joe units that use a 10-inch bar and matching chain setup, so it can fit models like the SWJ700E if your original bar length and chain specs match. Before installing, check your existing bar markings and chain configuration to confirm the drive link count, pitch, and gauge are the same.
Q: Does this combo come ready to install, and do I need to sharpen the chain before first use?
Yes, a bar and chain combo is typically meant to be installed directly onto your Sun Joe saw with the chain already sharpened for normal first-time use. Just make sure the chain is routed in the correct cutting direction, set proper tension so it snaps back lightly against the bar, and add bar-and-chain oil before running it.
Q: How often should I tension and maintain this 10-inch bar and chain on my Sun Joe saw?
Check chain tension before each use and again after the first few minutes of cutting, since a new chain can stretch slightly as it seats in. Keep the oil reservoir filled, clean the bar groove and oiling holes regularly, and inspect the cutters and drive links for wear to help the combo last longer and cut smoothly.
