Overview
This replacement 14” guide bar and chain set delivers OEM-equivalent fit and cutting performance for your chainsaw. Packaged together, the bar and chain are matched to ensure smooth tracking and consistent cuts. It is a cost-effective alternative when the factory parts are due for retirement.
Key specifications
- Bar length: 14”
- Chain pitch: 3/8”
- Drive links: 52DL
- Includes: guide bar and chain (matched set)
- Material: hardened alloy bar with chrome-plated chain
Compatibility
Fits SunJoe SWJ599E plus additional models with matching bar-mount specs. Cross-reference your chainsaw’s model and serial number with the compatibility table to confirm correct fitment before installing.
Installation notes
Remove the clutch cover and take off the spent bar and chain. Wipe down the bar pad and blow out the oiler port. Position the new bar, thread the chain onto the sprocket and around the bar groove making sure the cutters face forward on top. Use the tension screw to take up slack until the tie straps just lift off the bar rail, then secure the cover firmly.
Common questions
Q: Will this 14-inch bar and chain combo fit my SunJoe SWJ599E, or do I need to match anything besides the bar length?
Yes, this combo is made to be compatible with the SunJoe SWJ599E and matches the 14-inch bar size that saw uses. You should still confirm your saw is the SWJ599E model and that your current setup uses a 3/8 pitch chain so the drive components track properly.
Q: I have a SunJoe SWJ599E with a worn bar and a dull chain—can I replace both at the same time with this combo, and is installation straightforward?
Yes, this set is intended for replacing both parts together, which is often the best option if the old bar rails are worn along with the chain. Installation is straightforward: disconnect power, remove the side cover, swap the bar and chain in place, make sure the chain direction is correct, then set chain tension so it’s snug but still pulls around by hand.
Q: What maintenance should I do on this 14-inch 3/8 pitch bar and chain combo to keep it cutting well on my SWJ599E?
Keep the chain properly tensioned, top off bar and chain oil regularly, and clean the bar groove and oiling holes so lubrication can reach the chain. It also helps to inspect the cutters and drive links for wear and touch up the chain with the correct file when cutting performance starts to drop.
