Overview
Pair a fresh 16” bar with a factory-sharp chain in one package. This aftermarket combo replaces the original equipment on your saw and arrives ready to mount, so you can get back to cutting without delay. It is a practical choice when your current bar is worn or your chain has seen too many sharpenings.
Key specifications
- Bar length: 16”
- Drive links: 62DL
- Includes: guide bar and chain (matched set)
- Material: hardened alloy bar with chrome-plated chain
Compatibility
Designed for Stihl MS250 and other saws with identical bar-mount dimensions. Before purchasing, verify your specific model number in the compatibility listing, as some saws within a product line use different bar studs or tensioner positions.
Installation notes
Remove the side cover, slide the old bar off the studs, and clean any sawdust from the bar-mount area and oil port. Seat the new bar on the studs, loop the chain around the sprocket and bar nose, then hand-tighten the cover nuts. Adjust chain tension until the chain pulls away from the bar bottom about 1/8 inch and snaps back, then torque the nuts securely.
Common questions
Q: Will this 16-inch guide bar and chain combo fit my Stihl MS250 without any modifications?
Yes, this combo is made to be compatible with the Stihl MS250, so it should mount correctly with the proper bar studs, chain tensioner, and sprocket setup for that saw. Before installing, it’s still smart to confirm your saw is set up for a 16-inch bar and that your current chain specs match the replacement setup.
Q: Does this combo come ready to install on an MS250, or do I need to adjust the chain first?
You’ll want to install the bar and chain, then set the chain tension before running the saw. Make sure the chain is seated fully in the bar groove and around the drive sprocket, then tension it so the chain lifts slightly from the bar but the drive links still stay engaged.
Q: What maintenance should I do on this 16-inch bar and chain combo to help it last longer on my Stihl MS250?
Keep the chain sharpened, maintain proper chain tension, and check that the bar oiling hole and groove stay clean so the bar gets full lubrication. It also helps to flip the guide bar periodically to promote even wear and inspect the bar rails and chain for damage during regular service.
