Overview
Designed as a drop-in aftermarket replacement, this 16” bar and chain combo takes the guesswork out of ordering parts separately. The bar rail and chain pitch are matched at the factory, so everything lines up the first time you mount it. A practical upgrade for homeowners maintaining their own firewood saws.
Key specifications
- Bar length: 16”
- Chain pitch: 3/8”
- Drive links: 55DL
- Includes: guide bar and chain (matched set)
- Material: hardened alloy bar with chrome-plated chain
Compatibility
This combo is built to work with stihl MSA 220 C-B and equivalent models that share the same bar-mount geometry. Confirm your saw’s model and year against the compatibility chart to ensure a proper fit, particularly if your saw has been updated with a different oiler setup.
Installation notes
Loosen the bar-mount nuts and slide the old assembly off. Before fitting the new bar, clear packed sawdust from the oil passage and around the drive sprocket. Place the new bar onto the studs, route the chain around the bar groove and sprocket, then adjust tension to the point where you can pull the chain around by hand with light resistance. Snug the nuts in a cross pattern.
Common questions
Q: Will this 16-inch bar and chain combo fit my Stihl MSA 220 C-B, or do I need to match anything besides the 16-inch length and 3/8 pitch?
Yes, this combo is made to fit the Stihl MSA 220 C-B and matches the 16-inch bar length and 3/8 pitch specified for that saw. Before installing, it’s still a good idea to confirm your current setup matches those specs and that your sprocket and chain tensioner are in good condition for proper operation.
Q: Does this chain come ready to install on my MSA 220 C-B, and what should I check when mounting the new bar and chain?
It’s designed as a direct replacement combo, so you can install it on the MSA 220 C-B like your original bar and chain set. Make sure the chain teeth are facing the correct cutting direction on the top of the bar, set the chain tension so it snaps back into the bar groove, and recheck tension after the first few cuts since new chains tend to stretch slightly.
Q: Since this is a 3/8 pitch chain on a 16-inch bar, what maintenance will help it cut well and last longer on the Stihl MSA 220 C-B?
Keep the chain sharp, maintain proper tension, and regularly clean the bar groove and oiling holes so lubrication reaches the full bar length. It also helps to flip the guide bar periodically to promote even wear and inspect the drive links and bar rails for damage during routine maintenance.
