Bar & Chain Combos · SKU B0CM3LGXCH

36inch Chainsaw Guide Bar and Chain Combo

Name: 36inch Chainsaw Guide Bar and Chain Combo
Brand: YUTACOREX
SKU: B0CM3LGXCH

$87 Amazon rating ★ 3.9

36inch Chainsaw Guide Bar and Chain Combo,Replacement Accessories Fits stihl MS460,MS461,MS650,MS660,MS661,MS 500i R,MS 500i,MS 461R,MS 661 R,3003 000 6053,3…

Bar length36"

Pitch3/8"

Gauge.050""

CategoryBar & Chain Combos

Part numberB0CM3LGXCH

ConditionNew — aftermarket replacement

What the listing states

Listed as compatible with: Stihl MS440, MS441C-M, MS441C-Q, MS460, MS461, MS650, MS660, MS661, MS462 C-M, MS661 C-M, MS661 R C-M, MS500i R, MS500i, MS462 R C-M, MS462 R, MS661 R, MS461R, Oregon 363RNDD025, 3003 000 6053, 3003 000 9853
Replaces part numbers: 3003 000 6053 · 3003 000 9853
Chain type: Full Complement
Pieces in pack: 2

From our Amazon listing, checked September 25, 2026. Model and part-number matches are the seller's; confirm against the part on your machine.

Compatibility

The seller's listing names these models as compatible. Always confirm the model number stamped on your machine before ordering.

✓stihl MS460

Not sure which part you need? See our guide: How to measure your bar or How to read the stamp on your guide bar.

Before you buy — how to verify fitment

Identify your bar mount pattern. Different brands use different mounting slots — check your current bar or saw manual.
Match pitch and gauge. The bar and chain must share the same pitch and gauge as your saw's drive sprocket.
Verify bar length. Measure the cutting length of your current bar from tip to saw body.
Check the compatibility list above for your exact saw model.

Frequently asked questions

Why buy a bar-and-chain combo instead of separate parts?

Combos guarantee the bar and chain are matched — correct pitch, gauge, bar-mount pattern, and drive-link count. Buying separately risks a mismatch.

How do I verify the bar fits my saw?

Check the bar mount pattern (large or small Stihl, Husqvarna D009, etc.), the slot width (gauge), and the sprocket nose pitch. Our bar-measuring guide walks through each step.