Bar & Chain Combos · SKU B0CFDV1KPV

8inch Guide Bar and Chain Combo

Name: 8inch Guide Bar and Chain Combo
Brand: YUTACOREX
SKU: B0CFDV1KPV

$20 Amazon rating ★ 4.1

8-inch replacement guide bar and saw chain combo for pole saws. Direct fit for DEWALT DCPS620M1, RYOBI P436/P4360BTL, BLACK+DECKER LPP120B. 3/8 pitch, .043 gauge, 33 drive links.

Bar length8"

Pitch3/8"

Gauge.043""

Drive links33DL

CategoryBar & Chain Combos

Part numberB0CFDV1KPV

ConditionNew — aftermarket replacement

What the listing states

Check before ordering: the listing mentions drive links 56 (listing details) vs 33 (product data). Check the part you are replacing — its stamp, drive-link count or line diameter — before ordering.

Listed as compatible with: DEWALT, RYOBI, Remington, CRAFTSMAN, Arbor King, Oregon, Rotary
Replaces part numbers: 564284
Chain type: Low Profile
Pieces in pack: 1

From our Amazon listing, checked September 25, 2026. Model and part-number matches are the seller's; confirm against the part on your machine.

Compatibility

The seller's listing names these models as compatible. Always confirm the model number stamped on your machine before ordering.

✓DEWALT DCPS620M1 DCPS620B

✓RYOBI P436 P4360BTL P5452BTL P20310 RY43160A P2510

✓BLACK+DECKER LPP120B pole saw

Not sure which part you need? See our guide: How to measure your bar or How to read the stamp on your guide bar.

Before you buy — how to verify fitment

Identify your bar mount pattern. Different brands use different mounting slots — check your current bar or saw manual.
Match pitch and gauge. The bar and chain must share the same pitch and gauge as your saw's drive sprocket.
Verify bar length. Measure the cutting length of your current bar from tip to saw body.
Check the compatibility list above for your exact saw model.

Frequently asked questions

Why buy a bar-and-chain combo instead of separate parts?

Combos guarantee the bar and chain are matched — correct pitch, gauge, bar-mount pattern, and drive-link count. Buying separately risks a mismatch.

How do I verify the bar fits my saw?

Check the bar mount pattern (large or small Stihl, Husqvarna D009, etc.), the slot width (gauge), and the sprocket nose pitch. Our bar-measuring guide walks through each step.